Sök artiklar
Produkter
Version:
E-butik Flex (6.3)
SKU: ADA-2471
Lagerstatus: I lager (25-49st)
Adafruit HUZZAH ESP8266 Breakout
Beskrivning: Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don't have an onboard 500mA 3.3V regulator or level shifting, and aren't CE or FCC emitter certified....UNTIL NOW!

The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs. We added in:

Reset button,
User button that can also put the chip into bootloading mode,
Red LED you can blink,
Level shifting on the UART and reset pin,
3.3V out, 500mA regulator (you'll want to assume the ESP8266 can draw up to 250mA so budget accordingly)
Two diode-protected power inputs (one for a USB cable, another for a battery)
Two parallel, breadboard-friendly breakouts on either side give you access to:

1 x Analog input (1.8V max)
9 x GPIO (3.3V logic), which can also be used for I2C or SPI
2 x UART pins
2 x 3-12V power inputs, reset, enable, LDO-disable, 3.3V output
One breakout at the end has an "FTDI" pinout so you can plug in an FTDI or console cable to upload software and read/write debugging information via the UART. When you're done with your coding, remove the cable, and this little module can be embeded into your project box.

Each module comes pre-loaded with NodeMCU's Lua interpreter (NodeMCU 0.9.5 build 20150318 / Lua 5.1.4 to be specific), you can run commands, and 'save' Lua programs directly to the module's Flash using a USB-Serial converter cable. But, if you'd like, you can skip Lua and go direct to using the Arduino IDE. Once you download the ESP8266 core, you can treat it just like a microcontroller+WiFi board, no other processors needed!

Each order comes with one assembled and tested HUZZAH ESP8266 breakout board, and a stick of 0.1" header that you can solder on and plug the breakout into a breadboard. A soldering iron and solder are required for that, and aren't included. Solderless breadboard also not included. You'll really want a USB-serial cable such as a USB console cable (good for Windows, not suggested for MacOSX users), FTDI Friend (great for any OS), or FTDI cable (great for any OS) to upload software to the HUZZAH ESP8266!
Inkl moms: 119,00 sek
Mängdrabatt, klicka här!
Antal:
Klicka på bilden för att förstora
Relaterade produkter
SKU: ADA-2821
Beskrivning: Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new ...
Lagerstatus: I lager (25-49st)
Inkl moms: 189,00 sek Mängdrabatt
Antal:
SKU: WRL-13794
Beskrivning: Blynk is an easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their ...
Lagerstatus: Fåtal kvar i lager (7st)
Inkl moms: 329,00 sek Mängdrabatt
Antal:
SKU: DEV-13907
Beskrivning: The SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-charged version of the popular ESP8266. Like the ...
Lagerstatus: Fåtal kvar i lager (5st)
Inkl moms: 239,00 sek Mängdrabatt
Antal:
SKU: WRL-13231
Beskrivning: The SparkFun ESP8266 Thing is essentially a breakout and development board for the ESP8266 WiFi SoC. Why the name? We lovingly call it the Thing due ...
Lagerstatus: Fåtal kvar i lager (5st)
Inkl moms: 159,00 sek Mängdrabatt
Antal:
SKU: WRL-13711
Beskrivning: This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely design around the ESP8266, with an integrated FTDI ...
Lagerstatus: Fåtal kvar i lager (3st)
Inkl moms: 169,00 sek Mängdrabatt
Antal:
SKU: WRL-13287
Beskrivning: The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or ...
Lagerstatus: Fåtal kvar i lager (4st)
Inkl moms: 159,00 sek Mängdrabatt
Antal:
SKU: WRL-13678
Beskrivning: The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. ...
Lagerstatus: Tillfälligt slut, se vår FAQ
Inkl moms: 84,00 sek Mängdrabatt
Stäng
Kundvagnen är tom
Logga in
Logga in
Lösenord
Följ oss på:

Facebook  Google+ Twitter Blog  Instagram

Genuino @ LAWICEL Nu finns äntligen de rätta Arduinoprodukterna hos Lawicel, nämligen Genuino. Detta är Arduino.CC

DIBS

LightBlue Bean @ LAWICEL LightBlue Bean finns nu hos oss, börja utveckla trådlöst med Arduino och Bluetooth!
Välj valuta
Pris exkl/inkl moms
SparkFun @ LAWICEL Sensorer, Breakout Boards, Trådlöst, Arduino etc.
Vi är ett kreditvärdigt företag enligt Soliditets värderingssystem som baserar sig på en mängd olika beslutsregler. Denna uppgift är alltid aktuell, informationen uppdateras dagligen via Soliditets databas.
Kontakta oss Telefon: 0451-59877

Har du frågor, saknar någon artikel eller funderingar är du mer än välkommen att höra av dig till oss!
Kontakta oss
Info om cookies


LAWICEL AB, Box 3, 282 21 Tyringe, 556684-9203, Telefon 0451-59877